Come Along
  • Long-lasting 19-1/2" x 4-1/2" 14-
    gauge steel blade
  • Light weight
  • Available with or without a hook
  • 54" tapered ash dowel handle
  • Tapered ferrule supported by
    angular braces

                         $5.00 / day
Concrete Tools
Available at
Hilltop Tool Rental
Bullfloat
with 3 handles
$20.00 / day
Cyclone
The Cyclone combines easy
operation, low maintenance, compact
design and high production. A simple
design and state-of-the-art
manufacturing helps this breaker
deliver destructive force. The cyclone
attatchment fits all make of skid
steers including Bobcat, Case,
Caterpillar and John Deere.
                     $175.00 / day
CP 4123 3R Hammer

Weight  6.5 Kg
Length  378 mm  
Chuck size  17,3 mm  
Air consumption  12 l/s
Air inlet  3/8 inch
Stroke  76 mm  
Blows per minute    1920  
Retainer type  US standard (with spring)  
Handle type    Open handle - outside
trigger  

        
CP 1230 (1 1/8)

Weight  29.5 kg
Length   680 mm
Chuck size   28x160 mm
Air consumption  29 l/s
Air inlet  3/4 inch Swivel  
Blows per minute  1300  
Retainer type    Latch


CP 1240 (1 1/8)

Weight  37.5 kg  
Length  736 mm
Chuck size  28x160 mm
Air consumption  38 l/s  
Air inlet 3/4 inch Swivel  
Blows per minute 1200  
Retainer type Latch

CP 1240 (1 1/4)
Chuck size 32x160 mm
Pneumatic Breakers
$59.50 / day
Dewalt D25980
Pavement Breaker with Hammer Truck
Active Vibration Control® shocks reduce vibration felt by the user at the handles - A Perform
and Protect feature
52 joules of impact energy provides maximum performance
15 amp motor provides maximum power and overload protection
Rubber-coated handles provide greater comfort and control
Electronic Soft Start increases productivity by reducing bit walking
Hammer Truck provides easy transportation of pavement breaker

Impact Energy 52Joules                      Vibration Control        Yes - SHOCKS
Vibration Measurement   4.8 m/s2     Amps        15Amps
Max Watts Out        1600W                 Loaded Speed (BPM)        900bpm
Tool Length        30.75"                      Tool Weight        68.3lbs

                                                    $82.50 / day
Concrete Breakers
Georgia Buggies

For hauling and dumping
concrete, gravel and debris
Balance for extra heavy
duty loads.

$25.00 / day
Specifications:
Weight 155 pounds
Capacity 8 cubic feet.
Oversized 18 - 4
pneumatic wheels
all welded 14 gage
steel body
Length 55", Height
29.5", Width 35"
WBH-16EF 16 Cu. Ft. with foam-filled tires

This buggy is a versatile performer offering foam-
filled tires for maximum performance.
•Foam-filled tires provide additional traction and puncture
resistance
•Powered by a Honda GX390 engine recoil/electric start
•Forklift pockets for easy loading
•16-cubic-foot (435 liters) capacity
•Ideal for landscaping applications, material sub-base
distribution, job site cleanup and material transport
•Travels up to 7.25 mph (11.5 kph)
•Infinitely variable, fully hydraulic drive system for smooth,
steady operation
•Meets ANSI Braking guidelines B56.8-1993
                                                 
    $135.00 / day

                                                          
Motorized Georgia Buggies
Bartell DB21 Power Buggy

Dump and drive capability allows for feathering of load in forward and reverse.
• Operator's platform with simple and clean control system allows for
comfortable and convenient operation of the unit.
• Excellent traction and control with heavy-duty welded chassis.
• Rugged steel bucket stands up to the toughest job site conditions.
• Power supplied through heavy-duty hydraulic pump and two high efficiency
hydrostatic drive motors.
• Foot operated dump lever allows operator to keep both hands on steering
handle at all times.
• Foot actuated operating and parking brake.
• Heavy duty components for longer life.

Vanguard 18 V-Twin engine         44 in wheelbase
5.7 x 8 x 19 drive train                  4.8 x 8 x 16 steering tires
43.5 in  double wheels                 3,200 lbs max. load
21 cubic foot capacity                  6 in discharge height
7.25 mph at 4,000 rpm                 Hydrostatic brakes
Mechanical Parking Brake            Variable hydraulic dump
1,375 lb Operating Weight
                                                                         
$175.00 / day
EM-70
Mortar Mixer

Honda 11Hp gasoline engine
Mixer Capacity 12 cu ft
Heavy duty safety grate with bag
cutter  
High-strength cast iron paddle
arms with wiper blades
Mixers
MC-94S-H8
Concrete Mixer

Honda 8Hp gasoline engine
Mixer Capacity9 cu ft
21" Drum Opening
Manuel Dump

                $125.00 / day
Rebar Cutter

Can be bolted to board or floor for
easy one hand cutting.
Cuts and bends grade 60 rebar.
5/8" capacity, 52" length
Jars are made of high-carbon alloy
tool steel.

Specifications may change due to
continuous product development.

           $22.00 / day
         
Makita 14" 4-stroke Power Cutter
Features
No Oil Mixing Simplifies Operation and Prevents Engine Failure Due to Improper Mix

• Eliminates the need for separate mixed oil/fuel can
• Lower noise at 92.7dB(A) and smoother idle for continuous operation
• Automatic engine decompression valve is engineered into the cam gear to reduce pull-start
force by 40%
• Pressure compensated carburetor with vented choke plate is engineered to reduce flooding by
automatically adjusting to deliver the proper amount of fuel
• Integrated wheels reduce fatigue during long straight cuts and retract when not in use to
prevent unexpected movement
• Five-stage, foam-paper-nylon filtration system with advance direction air flow provides cleaner
air for better engine durability
• Clear primer bulb facilitates fuel delivery to the carburetor for easier cold starts
• Single lever On-Off-Choke operation switch for operator convenience
• Shielded exhaust outlet and larger spark arrestor screen prevents contaminates from restricting
air flow
• External fuel tank vent eliminates pressure build up
• Sealed cartridge recoil starter rope reduces wear by keeping out dust and debris
• Cutting arm easily changes from center position to flush (outboard) position allowing cuts
directly adjacent to curb edges, wall or directly above the ground
• Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator
comfort

Engine  Displacement  4.6 cu.in.                        Max Power  4.1 HP
No Load Speed  9,100 RPM                               Tank Capacity (oz.)  37.2  
Blades  Max Spindle Speed  4,300 RPM            Wheel Diameter  14"  
Arbor  20mm / 1" adaptor                                    Max Cutting Depth  4-13/16"  
Dry Weight (lbs.)    28.4                                       Shipping Weight (lbs.)    40.8  

                                                                  
 $85.00 / day
                       
Edco SK14-13H

•8" Wheels provide smoother cutting action with less vibration
•Lifting bail assists with easy loading and unloading
•More stable frame with wider wheel base
•Rear wheel shaft mounted end to end for greater frame rigidity
•More weight located over blade for faster cutting
•Heavy duty steel core wheels for years of service
•Heavy duty frame and undercarriage are 7-gauge steel to
eliminate frame vibration and bending
•Precision machined 1" arbor
•Compact size for easy loading and unloading
•Down-cut blade rotation
•3 belt drive delivers more power to blade shaft
                                                       
$95.00 / day
Edco SK20-20H
                                 $125.00 / day

Cut-Off Saws
D28755                                                
Specifications
Amps 15                              No Load Speed 4,300 rpm
Depth of cut 5"                     Horsepower 5.3
Dust collection - Yes              Wheel Diameter 14"
Motor Abrasion Protection      Tool Length 23.9"
Tool Weight 24.7 lbs           

                                               
$75.00 / day
           
 
Saws
Terrazzo Grinder
  • Twin counter-rotating discs provide a work area of 24" x 12".
  • Grind to within 1 1/2" of walls or obstructions.
  • Honda-powered gasoline engine
  • Attachments make the surface grinder one of the most
    productive and practical machines available for use by
    surface preparation contractors, concrete repair contractors
    and industrial building maintenance specialists.
  • Comfortable operator handle. Full width, tubular design
    maximizes operator leverage and control. Helps maximize
    productivity and minimize fatigue.
  • Choice of power sources. 2 or 3 HP electric, domestic and
    foreign voltage operation. 11 HP Honda gasoline.
  • Carry handles. Comfortable and functional when loading or
    unloading.
  • Full-length rubber bumper. Minimizes damage to vertical
    walls. Quickly removed for installation of safety and dust
    shield.

                                      $125.00 / day
Trowel Machine

MultiQuip Model: HPL-36-4-8H
This High-Performance power trowel with an
8-hp Honda engine offers low rotor speed with
high torque for floating and panning
applications.

Performance Data:
Number of Blades:                      4  
Ring Diameter - IN:          36, 46, and 48
Clutch Type:                         Centrifugal  
Pitch Control:                        Standard  
Rotor RPM:                              55-118  
$85.00 / day
$59.50 / day
Vibrator - complete assembly

Designed for pencil head vibrators, up to 1-3/8" in diameter, this heavy-
duty motor is designed for the rigors of the job site. Multiquip flex-shaft
vibrators are designed for work in medium to high-slump concrete. Typical
applications include small pours, slabs, driveways, stem walls and footings.

  • Large vibration isolated handles protect the motor and operator
  • Strain relief prevents power cord pullouts
  • Quick-disconnect knob for easy shaft removal
  • Cassette style motor improves durability and performance by
    minimizing friction and enabling the motor to maintain optimum RPM
  • Flow through ventilation reduces contamination by taking in air from
    the rear of the motor
  • Flexible shafts available in lengths from 2 to 21 feet
  • Ideal for steel vibrator heads available from 7/8" to 1-3/8 in diameter