Model BB14 14" Masonry Saw

•Rolling table will accomodate 16" blocks
•Portable model with 14” blade capacity
• Rounded blade guard with splash proof protection
• Universal cutting table with water drain holes and centered wood block eliminates
cutting through tables
• Side-Mounted handles for balanced lifting load
•Vacuum hookup optional for dust-free cutting
• 1/4" steel arbor wrench with saw-mounted wrench holder
•Adjustable cutting head can be used manually or locked in a fixed position
• Quick adjusting heavy-duty bearing assemblies for easy blade alignment
• Choose between optional folding upright stand or expandable ProCart for
convenient working height

Ideal For:
•Professional masons, paver installers, paver manufacturers, landscape suppliers,
nry suppliers and rental stores

Model BB14-5.5 Electric 1.5 HP, 115/230 V single phase motor, 18.8/9.4 Amps,
3450 RPMs standard V Belt, 43 x 25 x 32, 165 lbs.

                              Electric with Procart stand  $2,209.19
                                     with folding stand  $1,967.50

Model: BB-14-5.5H Gasoline, 5.5 HP,  3600 rpm, "V-Rib" Belts, 43"x 25"x 37", 175 lbs.
with blade and stand
                  Gas with Procart stand  $2,909.19
                                     with folding stand  $2,667.50
Specifications may change due to continuous product development.
Model GMS20-13H
20" Gasoline Masonry Saw

• Gasoline power
• Freestanding model with 14” to 20” blade capacity
•Large capacity, 3-stage air filter protects from wear
•Belt driven diaphragme water pump is standard and can be disconnected
when cutting dry
• Fixed or adjustable cutting head for extra versatility
• Extra-large rolling table supports large materials and rolls easily
• Double-sided table rails are easy to replace
• Standard foot pedal for hands-free operation
• Vacuum hookup optional for dust-free cutting
• Patented fixed engine platform

Ideal For:
•Professional masons, block manufacturers, block masons, paver
manufacturers, paver installers, landscape suppliers, masonry equipment

13 HP gasoline engine, 2400 RPMs, standard V-Belts, 58.5 x 26 x 75.5,
485 lbs.

Specifications may change due to continuous product development.
Available at
Hilltop Tool Rental
20" Self-Propelled Saw

•Stressproof, precision-machined, 1 3/4" steel arbor shaft
•Includes electric start, 12-volt battery and heavy-duty 15-amp
charging system
•Swing-away, rear 3-gallon fuel tank
•Screw-type depth control w/lock guarantees accurate cutting

Ideal For:
•Highway, road and bridge deck repair
•Utility installation and or traffic loop installation

20 HP Honda, 2760 RPMs, Cgd. V-Belt, 45 x 25 x 39, 458 lbs.

Specifications may change due to continuous product development.
Model SS26-38K
26" Self-Propelled Saw

•Stressproof, precision-machined, 2" steel arbor shaft
•Includes electric start, 12-volt battery and heavy-duty 30-amp charging
•Locking depth control allows operator to easily return to same depth, cut
after cut
•Positive-traction, chain drive rear axle prevents slippage and improves
cutting speeds
•Swing-away, rear 6.4-gallon fuel tank
•Can be fitted with a 30" Blade Guard to accomodate a 30" Diamond Blade

38 HP Kohler, 2091 RPMs, Cgd. V-Belt, 53 x 32 x 49, 1040 lbs.
Specifications may change due to continuous product development.
Edco TMS-10
10", 1 HP Electric Tile Saw
Cuts up to 12" tiles diagonally or 20" tiles
lengthwise; 2-position tray makes it easy to cut large
or small tile
Vertical and horizontal shielded bearings provide
smoother rolling table for cleaner cuts
Heavy-duty, screw-type depth control provides easy
blade adjustment and prevents cutting into roller table
Positive-drive timing belt pulley system delivers
maximum power to the blade with minimum vibration
Rolling table is locked to guide rails so it can not be
misplaced or forgotten and is oversized to
comfortably support larger tiles
Adjustable water flow, electric water pump and 10"
continuous rim blade are included Ideal For:
Professional tile contractors, tile installers, floor
covering suppliers, tile manufacturers and rental

Model: TMS-10
Powe      Electric                  H.P.        1 HP 115 V  
Phase     Single                    Amps      13.4  
RPM's      2330                     Belts       Timing Belt  
Length    35"                       Width      22"  
Height     51" on Stand       Weight    111 lbs.  
Edco SK14-13H

•8" Wheels provide smoother cutting action with less
•Lifting bail assists with easy loading and unloading
•More stable frame with wider wheel base
•Rear wheel shaft mounted end to end for greater
frame rigidity
•More weight located over blade for faster cutting
•Heavy duty steel core wheels for years of service
•Heavy duty frame and undercarriage are 7-gauge steel
to eliminate frame vibration and bending
•Precision machined 1" arbor
•Compact size for easy loading and unloading
•Down-cut blade rotation
•3 belt drive delivers more power to blade shaft
  • Extra heavy walled 31/2” square tube
    column, largest in the industry
  • Brass wear strips and easy carriage
    adjustment allows precision tolerance drilling
  • 12” diameter drill bit capacity standard;
    expandable in 2” increments with optional
    motor spacer blocks.
  • Choice of 15 and 20 amp Milwaukee motors
  • Standard with combination vacuum anchor
  • Premium large diameter wheels
  • Electric circuitry incorporated into
    conveniently located ammetercontrol center

  • Power 20 AMP Milwaukee Motor
  • Leveling System Four ½” – 13 Bolts
  • Anchor Slot Removable Plug
  • Raise/Lower Rack & Pinion w/Spoked
  • Width 14"
  • Height 4'
  • Base Length 19-1/4"
  • Overall Length 30"
  • Weight 165 lbs.
Edco Diamond Coring Rig
$3,330.00  Single Head
$4,355.00 Duel Head

GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s
NEW Magna-Trap™ Slide-On Tooling.
GRIND LEVEL: Using EDCO’s exclusive Leveling System Hand Wheel you
can adjust the machine’s height, use a wide range of accessories, and
truly grind level. Level grinding is quicker, smoother, easier on the
operator , and increases accessory life.
VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes
dust prevention easier. Simply readjust the shroud according to the
height of the accessory being used.
Extra Weight Standard: This bolted-on weight tray helps the machine
work.  Use when needed
Multi-Vac port for use with 2″ or 3″ vacuum hose
11″ working width will grind approximately 200-250 sq.ft. per hour at
1/32″ with EDCO Magna-Trap™ Dyma-Dots (Single)
22″ working width will grind approximately 400-500 sq.ft. per hour at
1/32″ with EDCO Dyma-Serts DDual)
Electric machine plugs into dedicated residential wall outlets
Includes 1 magnetic multi-accessory disc, which accepts Dyma-Serts, Strip-
Serts and all other Magna-Trap™ accessories. 3 grinding accessories
required per loading
EDCO’s Vortex 200 Vacuum System suppresses all the dust created by
EDCO Grinders

•22″ Working Width grinds approximately 500 sq. ft. per hour at 1/32″ –
1/16″ per pass with Magna-Trap™ Dyma-Dots
Includes 2-Slide-On Multi-Accessory Discs, which accept all EDCO Magna-
Trap™ Tooling
Overlapping counter rotating heads for full coverage
2-3″ Vacuum Port and Water Port
6 Magna-Trap™ Tooling accessories required per loading
Fully adjustable rubber dust shroud

Specifications may change due to continuous product development.
Vortex-200 VACUUM

EDCO Vacuum Systems can be used for dust control
with EDCO Grinders, Scarifiers, Scabblers, and
Hardscape & Masonry Saws.

Electric 110 volt 16 amp dual motor
Vac system ideal for fine dust removal
9 gallon capacity
Cast-composite material guaranteed for life not to crack
94″ lift column
25 ft, 2″ diameter hose included
200 CFM
13 Sq. ft. of filter area
Micro-clean filter guaranteed for 3 years
Comes Standard with Wand Kit for floor cleaning